1. It can be contacted with acid-base rubber gloves with a concentration of less than 40%. If it is exposed to acid-base solutions with a concentration of more than 40% for a short time, it should be rinsed with clean water immediately after use to avoid shortening the use time.
2. Contact with strong oxidizing acids such as nitric acid, chromic acid, etc., will cause brittleness, discoloration, and early damage to the product due to strong oxidation. High concentration of strong oxidizing acid can even cause burning, so attention should be paid.
3. Latex industrial gloves are only suitable for weak acids, low-concentration sulfuric acid, hydrochloric acid and various salts. Do not contact with strong oxidizing acids such as nitric acid.
4. General latex work gloves and agricultural gloves are only suitable for contact with general pollutants, and cannot be used for contact with acid and alkali.
5. Prevent contact with gasoline, engine oil, lubricating oil, and various organic solvents during use; prevent sharp metal cutting and contact with high temperature.
After use, the acid-base liquid or dirt on the surface should be rinsed with clean water and dried, and no exposure to the sun or baking is allowed. Sprinkle a small amount of talcum powder if not used for a long time to avoid adhesion.
