1. How to use protective gloves correctly?
In daily life, people will wear protective gloves to protect their hands when they work or work, but now many users often wear incorrect gloves when using protective gloves, which will cause certain damage to the hand, then how should the protective gloves be used correctly?
1) In the selection of protective gloves must have sufficient protective effect, if it is a steel wire anti-cutting environment, it is necessary to choose steel wire anti-cutting gloves, then you can not choose the synthetic yarn anti-cutting gloves, must ensure the protective function of the gloves, if you can not ensure that the gloves must be replaced to ensure the safety of the hand.
2) When using labor protection gloves, check them in time to see if there are holes or damage and abrasion in the gloves, and they must be replaced in time. For anti-chemical gloves to use inflatable inspection, so that we can find out whether there is a problem.
3) We should pay attention to is that the gloves used in different occasions are not the same, must choose the corresponding protective gloves, otherwise it will reduce the service life of protective gloves. When using protective gloves, be sure to pay attention to safety, do not throw contaminated gloves arbitrarily to avoid causing injury to others. Keep gloves in a safe place if you are not using them.
4) After the completion of the work, we must pay attention to the correct method when removing the protective gloves, because the inside of the gloves is a hotbed for breeding bacteria and microorganisms, and sharing gloves is easy to cause cross infection. Cover the wound before putting on gloves. The skin is a natural barrier against environmental damage, preventing the entry of bacteria and chemicals.
2. Precautions for the use of protective gloves
In our daily work, many workers in construction, processing and manufacturing industries will use protective gloves to protect their hands in daily work, and there are many types of protective gloves, the following to introduce the use of protective gloves when precautions.
1) Latex industrial protection gloves are only suitable for weak acids, sulfuric acid and various salts with low concentration, and must not be in contact with strong oxidizing acids (nitric acid, etc.).
2) Rubber, plastic and other protective gloves should be washed and dried after use, avoid high temperature when stored, and sprinkle talc on the product to prevent adhesion.
3) Waterproof, acid and alkali resistant gloves should be carefully checked before use to observe whether the surface is damaged, the simple way to take is to blow air into the glove, pinch the sleeve with your hand, and observe whether there is air leakage. Do not use if air leaks.
4) Insulation gloves should be regularly tested for electrical insulation performance, and those that do not meet the requirements cannot be used.
5) Acid and alkali resistant gloves, there are strong acid (alkali) resistance, there are only low concentration of acid (alkali) resistance, organic solvents and chemical reagents are different. Therefore, it cannot be used indiscriminately to avoid accidents.
6) Contact with strong oxidizing acids such as nitric acid, chromic acid, etc., due to strong oxidation will cause the product brittle, discoloration, early damage. High concentration of strong oxidizing acid can even cause burning, should pay attention to observation.
