First, how to divide the grade of anti-cutting gloves
The most common standard for the classification of cut-resistant gloves is EU BS EN 388 (equivalent to the Australian/New Zealand standard AS/NZS 2161.3), which covers four types of mechanical risks, namely anti-wear, anti-cut, anti-tear and anti-stab. Gloves that meet the specification should be marked with the shield symbol of the image of a blacksmith's hammer iron, and the protection level is expressed in a scale of 1 to 4, and some cut-resistant gloves can be rated as high as level 5. In some cases, "x" and "0" are also used to indicate not applicable and a rating below "1" respectively. Cut-resistant gloves must also meet the requirements of BS EN 420 for general, comfort and efficiency, test procedures and marking and information, such as water penetration, the amount of chromium hexavent released by leather gloves, etc.
The anti-cutting test process of anti-cutting gloves is: in the glove palm sample, cross cutting back and forth with a tungsten steel rotary cutter, and record the number of revolutions required to cut through the sample, to compare the results of the standard cotton sample for comparison test at the same time, the higher the calculated index, the stronger the anti-cutting performance. However, the cut resistance test is not suitable for very hard materials.
Second, what are the materials of anti-cutting gloves
1, Kevlar (aramid) : aramid is an aromatic polyamide product, the fiber color is yellow, strong and lightweight, flexible, 5 times stronger than the same weight of steel, flame resistant, will not melt at high temperatures, so it is more suitable for high temperature workers, such as: metal smelting, industrial welding, glass processing, etc.
2, Dyneema/Spectra (high strength polyethylene fiber) : tough and lightweight, good fit, good wear resistance, small friction coefficient, high strength, is the same section of steel wire more than ten times. It is used for high-strength industry workers, such as metal processing, body assembly, stamping operation, etc.
3, steel wire and polyester fiber: steel gloves have the highest cutting resistance, suitable for dealing with human-operated blades, in addition to the food processing industry, but also used to defend against animal bite.
Third, the performance of anti-cutting gloves
1, anti-cutting, anti-stabbing, anti-slip, wear-resistant.
2, with strong anti-cutting performance. Wear resistance and puncture resistance.
3, can effectively protect the hands from being cut by knives and other sharp edges.
4, excellent anti-slip performance can protect when grabbing objects will not fall.
Four, how much is the price of anti-cutting gloves
The price of cut-resistant gloves is different according to the material and grade it uses, and its price is about 10 yuan - more than 100 yuan. When selecting cut-resistant gloves, you can choose the appropriate grade of gloves according to the anti-cutting strength and specific use occasions.
