Clean and save
1. Wash the gloves with soapy water (50 degrees Celsius) or hot water (50 degrees Celsius) mixed with detergent, at least once a day.
2. Store the cleaned gloves in a cool and ventilated place.
3. Do not clean the steel wire gloves by hitting hard objects.
4. Avoid sharp objects contacting the surface of the glove as much as possible when using it.
Precautions
It is not advisable to use cut-resistant gloves when repairing thorny flowers. Because the cut-resistant gloves are made of steel wire, there will be many dense small holes to allow the thorns to pass through. The correct gloves should be used when repairing flowers and plants to avoid injury.
Cut-resistant gloves are designed for people's long-term industrial safety. Under long-term use, small holes can appear in the glove after constant contact with a sharp knife. If the small hole of the glove exceeds 1 square centimeter, the glove needs to be repaired or replaced.
